Contact with us

    SHARK 332 NC 5.0

    Product Code: SHARK 332 NC 5.0

    SHARK 332 NC 5.0, electrohydraulic band sawing machine with multimicroprocessor which can operate in automatic, semi-automatic, semi-automatic/dynamic and manual mode.
    – Automatic cycle (to cut from 0° to 60° left)
    – Semi-automatic, semi-automatic/dynamic and manual cycle (for cuts from 45° right to 60° left).
    – CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.
    A FEW FEATURES:
    -7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive , it guarantees a reliable use and it controls all cutting parameters in real time
    – Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.
    – Visualization and registration of alarms and events with the possibility to visualize the story of occurred events.
    – Electronic inverter for the continuous adjustment of the band speed from 15 to 100 m/min.
    – Latest generation hydraulic control unit, with high efficiency and low energy consumption.
    – Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).
    – Cutting head and feeding vice positioning with joystick
    – Automatic acquisition of the actual starting point of the cut.
    – Electronic transducer to visualize band tensioning.
    – Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.
    – Coolant tank inside the steel base with two electric pumps so as to lube-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator (see optionals).
    – Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditio- nal lubrication with emulsible oil.
    – Wire chip brush for band cleaning.
    – Machine preset for being handled by transpallet.
    – Bi-metal band for solids and sections.
    – Service keys and instructions manual for maintenance and spare parts list.
    FEATURED SPECIFICATIONS:

    Package: 1 Pairs

    You are 10 minitues away from the Help you need

      Find Out How We Can Help You

      At LGF SYSMAC we aim to be a well-established organization which can offer hardware solutions
      with highest levels of performance, security and safety without compromise on operation and aesthetics.